SAE AS115851A Screw - Flat Fillister, Drilled Head, Cadmium Plated, Steel UNS G87400, 125 ksi min .2500-20 UNC - 3A standard by SAE International, 09/07/2006
SAE ARP 4087B Wing Inspection Lights - Design Criteria standard by SAE International, 09/01/2006
SAE J 1939-11 Physical Layer, 250K bits/s, Twisted Shielded Pair standard by SAE International, 09/01/2006
SAE AMS5571H Steel, Corrosion and Heat Resistant, Seamless Tubing 18Cr 10.5Ni 0.70Cb (Nb) (SAE 30347) Solution Heat Treated standard by SAE International, 09/01/2006
SAE AMS5523F Steel, Corrosion and Heat Resistant, Sheet, Strip, and Plate, 23Cr 13.5Ni (SAE 30309S), Solution Heat Treated standard by SAE International, 09/01/2006
SAE AMS5442 Nickel Alloy, Corrosion and Heat-Resistant, Bars, Forgings, and Rings Ni 18Cr 2.8Mo 5.5Cb(Nb) 0.70Ti 1.50Al 10Fe 9Co 1W Consumable Electrode Remelted or Vacuum Induction Melted 1775 mDF (968 mDC) Solution and Precipitation Heat Treated standard by SAE International, 09/01/2006
SAE AMS4344C Aluminum Alloy, Extrusions, 5.6Zn 2.5Mg 1.6Cu 0.23Cr (7175-T73511) Solution Heat Treated, Stress Relieved by Stretching, Straightened, and Overaged standard by SAE International, 09/01/2006
SAE AMS4248B Aluminum Alloy, Hand Forgings and Rolled Rings 1.0Mg 0.60Si 0.28Cu 0.20Cr (6061-T652) Solution Heat Treated, Stress Relief by Compression, and Precipitation Heat Treated standard by SAE International, 09/01/2006
SAE AMS4016L Aluminum Alloy, Sheet and Plate, 2.5Mg 0.25Cr (5052-H32), Strain Hardened, Quarter-Hard, and Stabilized ( Reaffirmed: Apr 2012 ) standard by SAE International, 09/01/2006
SAE AMS2280B Trace Element Control, Nickel Alloy Castings standard by SAE International, 09/01/2006
SAE AIR790C Considerations on Ice Formation in Aircraft Fuel Systems standard by SAE International, 08/24/2006
SAE ARP5453 Training Pilots Prior to Simultaneous Instrument Landing System (ILS) Precision Runway Monitor (PRM) Approaches to Closely-Spaced Parallel Runways standard by SAE International, 08/14/2006