SAE AMS7011 Electron Beam-Powder Bed Fusion (EB-PBF) Produced Preforms and Parts Titanium Alloy, 6Al - 4V Hot Isostatically Pressed standard by SAE International, 11/22/2022
SAE AMS4466B Aluminum Alloy, Sheet and Plate, Alclad 4.4Cu - 1.5Mg - 0.60Mn (Alclad 2024, -T361 Sheet and Plate) Solution Heat Treated, 6% Cold Worked, and Naturally Aged standard by SAE International, 11/22/2022
SAE AS90347B CABLE ASSEMBLY, EXTERNAL ELECTRIC POWER, AIRCRAFT, 28 VOLT DC, OPERATING POWER standard by SAE International, 11/22/2022
SAE AMS2431/2G Peening Media (ASH) Cast Steel Shot, High Hardness (55 to 62 HRC) standard by SAE International, 11/22/2022
SAE J2914_202211 Exhaust Gas Recirculation (EGR) Cooler Nomenclature and Application standard by SAE International, 11/22/2022
SAE AIR1922B Aerospace – System Integration Factors That Affect Hydraulic Pump Life standard by SAE International, 11/18/2022
SAE AMS5350K Steel, Corrosion and Moderate Heat-Resistant, Investment Castings 12.5Cr (410) Hardened and Tempered standard by SAE International, 11/18/2022
SAE AMS5356D Steel, Corrosion-Resistant, Investment Castings 15Cr - 4.6Ni - 0.22Cb - 2.8Cu Solution and Precipitation Heat Treated (H1100) 130 ksi (896 MPa) Tensile Strength standard by SAE International, 11/18/2022
SAE AMS5932C Steel, Corrosion- and Heat-Resistant, Bars, Forgings, and Mechanical Tubing 14.5Cr - 2.3Ni - 12.5Co - 4.0Mo - 0.60V - 0.03Cb(Nb) Carburizing, Premium Aircraft-Quality, Double Vacuum Melted standard by SAE International, 11/18/2022
SAE AMS5650G Steel, Corrosion- and Heat-Resistant, Bars, Wire, Forgings, Mechanical Tubing, and Rings 23Cr - 13.5Ni (309S) Solution Heat Treated standard by SAE International, 11/18/2022
SAE J2777_202211 Recommended Best Practice for Climatic Wind Tunnel Correlation standard by SAE International, 11/14/2022
SAE AS5502E Standard Requirements for Aerospace Sealants and Adhesion Promoters standard by SAE International, 11/14/2022