SAE AS25019B CABLE ASSEMBLY, EXTERNAL ELECTRIC POWER, AIRCRAFT, 28 VOLT DC, JET STARTING standard by SAE International, 05/16/2022
SAE AMS5871G Iron-Nickel-Chromium Alloy, Corrosion- and Heat-Resistant, Sheet, Strip, and Plate 21Cr - 32.5Ni - 0.38Ti - 0.38Al - 45Fe Solution Heat Treated standard by SAE International, 05/16/2022
SAE AMS5698H Nickel Alloy, Corrosion- and Heat-Resistant, Wire 72Ni - 15.5Cr - 0.95Cb - 2.5Ti - 0.70Al - 7.0Fe Solution Heat Treated, Precipitation Hardenable standard by SAE International, 05/16/2022
SAE J2915_202205 H-III5F Spine Box Update to Eliminate Noise standard by SAE International, 05/09/2022
SAE AS3269B SLEEVE HALF – REINFORCING, TUBE, SHOULDER (Stabilized: May 2022) standard by SAE International, 05/09/2022
SAE AS1001K FITTING, TEE, STANDARD AND REDUCER, BULKHEAD ON RUN, INTERNAL PORT ON SIDE, FLARELESS standard by SAE International, 05/09/2022
SAE AS1002K FITTING, TEE, STANDARD AND REDUCER, BULKHEAD AND INTERNAL PORT ON RUN, FLARELESS standard by SAE International, 05/09/2022
SAE AS115851C SCREW - FLAT FILLISTER, DRILLED HEAD, CADMIUM PLATED, STEEL UNS G87400, 125 KSI MIN .2500-20 UNC - 3A standard by SAE International, 05/09/2022
SAE AS1008K FITTING, ELBOW, 90°, STANDARD AND REDUCER, BULKHEAD, FLARELESS standard by SAE International, 05/09/2022
SAE AS3268B SLEEVE HALF – REINFORCING, TUBE (Stabilized: May 2022) standard by SAE International, 05/09/2022
SAE AS1958A PORT-FLUID CONNECTION, RING LOCKED INSERT, STANDARD DIMENSIONS FOR (Stabilized: May 2022) standard by SAE International, 05/09/2022
SAE AS85421/2C FITTING END, STANDARD DIMENSIONS FOR, BULKHEAD, DYNAMIC BEAM SEAL, MALE standard by SAE International, 05/09/2022