SAE AMS4211C Aluminum Alloy, Plate 6.2Zn - 1.9Cu - 2.1Mg - 0.10Zr (7040-T7451) Solution Heat Treated, Stress Relieved, and Overaged (Composition similar to UNS A97040) standard by SAE International, 04/03/2018
SAE AMS4338B Aluminum Alloy, Extrusionsn 4.0Cu - 1.3Mg - 0.60Mn (2026-T3511) Solution Heat Treated and Stress Relieved by Stretching (Composition similar to UNS A92026) standard by SAE International, 04/03/2018
SAE AMS4085E Aluminum Alloy Sheet 5.7Zn - 2.2Mg - 1.6Cu - 0.22Cr (7475-T761) Solution Heat Treated and Overaged (Composition similar to UNS A97475) standard by SAE International, 04/03/2018
SAE AMS4249B Aluminum Alloy Castings 7.0Si - 0.58Mg - 0.15Ti - 0.06Be (D357.0-T6)Solution and Precipitation Heat Treated (Requiring Fatigue and Fracture Toughness Testing) (Composition similar to UNS A43570) standard by SAE International, 04/02/2018
SAE AIR809B Metal Dimensional Change with Temperature (Stabilized: Mar 2018) standard by SAE International, 03/30/2018
SAE AS21429B BEARING, ROLLER, ANTIFRICTION, ROD END,EXTERNAL THREAD, SELF-ALIGNING, AIR FRAME, -67 °F TO 350 °F TYPE 1, HEAVY DUTY, SEALED standard by SAE International, 04/02/2018
SAE MA1568A Nut, Self Locking - UNS S66286, 425°C & 650°C, 1100 MPa, MJ Thread, Procurement Specification For, Metric (Stabilized: Mar 2018) standard by SAE International, 03/30/2018
SAE ARP674D Groove Design, Metal O-Ring Gasket (Stabilized: Mar 2018) standard by SAE International, 03/30/2018
SAE MA3349A NUT, SELF LOCKING - REDUCED HEX DRIVE, UNS S66286, SILVER PLATE, MJ THREAD, METRIC (Stabilized: Mar 2018) standard by SAE International, 03/30/2018
SAE MA4368A Nut, Plain, Round - Spanner Wrenching, Shaft Mounted, UNS S66286, Procurement Specification For, Metric (Stabilized: Mar 2018) standard by SAE International, 03/30/2018
SAE AMS1370B Compound, Rust Remover, Liquid Aircraft and Aerospace Components, Immersion Tank Method (Stabilized: Mar 2018) standard by SAE International, 03/29/2018
SAE AS23053/1A INSULATION SLEEVING, ELECTRICAL, HEAT SHRINKABLE, CROSSLINKED CHLORINATED POLYOLEFIN, FLEXIBLE standard by SAE International, 03/29/2018